Amprobe PQ55A Power-Analyzer Manual de usuario descargar pdf (Pagina 23)

Basic Settings

The data and the sampling rate should be set before starting the recording.

For time setting, simultaneously press the “SET” (14) and “TIME“ keys (15).

The TIME” symbol (5.44) is displayed and the line “Date and Time” is indi-

cated with the following assignment:

Y-M (5.24) display for year (Y) and month (M)

D-h (5.27) display for day (D) and hour (h)

m-s (5.31) display for minute (m) and second (s)

1) The respectively blinking value may now be modified using the navigation

keys “

5“ and “ 6“ (16).

2) The navigation keys “

4 “ and “3 “ (16) may be used to change to the fol-

lowing or previous field.

3) If the setting is correct, the entry is terminated pressing the “ “ key (16a).

Now, the symbol “INTV” (5.42) is displayed as well as the field to enter the sam-

pling rate (5.32).

4) The value can be set using the navigation keys “5“ and “ 6“ (16).

☞ The following settings are possible: 5 s, 30 s, 1 min, 2 min.

5) After having entered the sampling rate, the basic setting is terminated

with the “ “ key (16a).

Performing a Recording

1) Perform the measurement

2) Press the “START” key (17) to start the measurement.

☞ The symbol [M] (5.10) is displayed which will be briefly hidden during auto-

matic saving, depending on the pre-set sampling rate.

☞ T he number of the current measurement series (5.9) is displayed below the

symbol [M].

☞ It is possible to save maximum 10 measurement series.

☞ Maximum 12,000 measurement values can be saved within one measurement

series.

☞ The memory is full if FF is displayed.

3) Terminate the recording by pressing the “STOP” key (18).

☞ If the instrument is switched off during running measurement, the recording

data will be lost.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

Sin comentarios

Amprobe PQ55A Power-Analyzer Manual de usuario Pagina 23