Amprobe ACDC-100 Especificaciones descargar pdf (Pagina 13)

Capacitance

RANGE

Accuracy

2) 3)

500.0 nf, 5.000 µf, 50.00 µf, 500.0 µf, 3000 µf ± (3.5% + 6dgts)

Resolution: 0.1 nf on 500.0 nf range

Additional 50.00nf range accuracy is not speciﬁed

Accuracies with ﬁlm capacitor or better

Speciﬁed with battery voltage above 2.8V (approximately half full battery). Accuracy

decreases gradually to 12% at low battery warning voltage of approximately 2.4V

DC Current (Clamp-On)

RANGE Accuracy

1) 2)

0.0A to 400.0A ± (1.5% + 4dgts)

400A to 800A ± (1.5% + 4dgts)

800A to 900A ± (2.0% + 4dgts)

900A to 1000A ± (5.0% + 30dgts)

Max current: 1000A continuous

Resolution: 0.1 A on 400 A range

Induced error from adjacent current-carrying conductor: < 0.01A/A

Zero mode must be applied to zero the unit before measurement to ensure accuracy.

ACA Current (Clamp-on)

RANGE Frequency Accuracy

1) 2)

400.0A 5Hz to 40Hz ± (2.0% + 5dgts)

400.0A 40Hz to 200Hz ± (1.5% + 5dgts)

< 50A

200Hz to 400Hz ± (1.5% + 5dgts)

< 50A

400Hz to 1kHz ± (2.0% + 5dgts)

400A to 600A 5Hz to 40Hz ± (2.0% + 5dgts)

400A to 600A 40Hz to 100Hz ± (1.5% + 4dgts)

600A to 800A 5Hz to 60Hz ± (5.0% + 30dgts)

Max current: 800A rms continuous

Resolution: 0.1 A on 400 A range

Induced error from adjacent current-carrying conductor: < 0.01A/A

Crest Factor (ACDC-100 TRMS): < 1.6 : at full scale; < 3.2 : at half scale

± (4.0% + 5dgts) for ACDC- 100 TRMS

Accuracy is speciﬁed at <50A in this frequency bandwidth due to limited calibrator output

capability for testing

1 2 ... 8 9 10 11 12 13 14 15 16

Sin comentarios

Amprobe ACDC-100 Especificaciones Pagina 13