Amprobe ACD-14-PLUS Clamp-On-Multimeters Manual de usuario descargar pdf (Pagina 15)

ACA Current (Clamp-on 50Hz / 60Hz)

Range Accuracy

1) 2) 3)

40.00, 400.0, 600 A ±( 1.5% rdg + 8 digits)

Overload Protections: ACA Clamp-on jaws: 600 A rms continuous

ACD-14 Plus: Average Sensing

ACD-14 TRMS Plus: True RMS sensing - 10 % to 100 % of range

1) Max Induced error from adjacent current carrying conductor: 0.05 A

2) Specified accuracy is from 1% rdg to 100% rdg of range and for measurements

made at the jaw center. When the conductor is not positioned at the jaw center,

position errors introduced are: Add 2% rdg to specified accuracy for measurements

made BEYOND jaw marking lines (toward jaw opening)

3) Add 8 digits to specified accuracy @ reading < 10% rdg of range

Frequency

Function Sensitivity (Sine RMS) Range Accuracy

400.0 mVac 350mV 10 Hz ~ 2 kHz ±( 0.5% rdg + 4 digits)

4.000 Vac 1V 5 Hz ~ 5 kHz ±( 0.5% rdg + 4 digits)

4.000, 40.00 Vac 32V 5 Hz ~ 100 kHz ±( 0.5% rdg + 4 digits)

400.0 Vac 90V 5 Hz ~ 10 kHz ±( 0.5% rdg + 4 digits)

600 Vac 500V 5 Hz ~ 5 kHz ±( 0.5% rdg + 4 digits)

Display counts: 5000

Resolution: 0.001Hz

Transient protection : VAC input jacks : 6.5kV (1.2/50μs surge)

Ohms

Range Accuracy

400.0 Ω ±( 0.8% rdg + 8 digits)

4.000, 40.00, 400.0 kΩ ±( 0.6% rdg + 4 digits)

4.000 MΩ ±( 1.0% rdg + 4 digits)

40.00 MΩ ±( 2.0% rdg + 4 digits)

Open Circuit Voltage : 0.4 VDC typical

Transient protection : 6.5 kV (1.2/50μs surge)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 147 148

Sin comentarios

Amprobe ACD-14-PLUS Clamp-On-Multimeters Manual de usuario Pagina 15