Amprobe Multitest-1000 Continuity-Tester Manual de usuario descargar pdf (Pagina 43)

5. HOW TO SAVE, RECALL AND CLEAR DATA STORED IN MEMORY

5.1. SAVE: "SAVE" KEY

If the results relative to the tests performed are to be stored you can proceed as follows:

1. Press the SAVE key once.

SAVE

)

MEM

PLA

If the memory of the instrument is not

empty it displays the screen alongside.

Number of the memory location in which the

measurement results will be stored.

Value of the parameter PLA related to the

measurement to be saved.

2. Use the & keys to increase or decrease the value of the PLA

(Place) parameter

to be related to the measurement that is to be

saved. This parameter helps the operator to classify the tests

performed.

Example: If the tests are to be carried out in a building, the operator

can associate the measurements performed in a room

with a given value of the parameter PLA. In this way

different values of the parameter PLA will correspond to

different rooms.

3. Press the SAVE key again, the instrument emits two beeps,

confirming that the test results have been stored.

SAVE

RCL

ESC

Press RCL/ESC key at any time

to leave the memory menu and go

back to the measurement selected.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 121 122

Sin comentarios

Amprobe Multitest-1000 Continuity-Tester Manual de usuario Pagina 43