Amprobe Multitest-1000 Continuity-Tester Manual de usuario descargar pdf (Pagina 45)

5.3. CLEAR: "CLR" KEY

If you want to cancel

the stored tests results proceed as follows:

1. Press the RCL/ESC key. The instrument displays a screen like the

following:

MEM

Pla

2. Use the & keys to select the number of the memory location.

ATTENTION: The instrument will cancel all the results stored from the memory location

selected to the last.

3. Press the DISP key to display the test result related to the memory

location selected.

4. Press CLR once. The blinking

symbol "clr" is displayed. Now you face

two possibilities:

MEM

C i

Number of the memory location in which the

measurement result was stored.

Value of the parameter PLA related to the

saved measurement.

DISP

Last location with data stored.

The instrument cancels the memory cells from

n.2 to n.8, where n.2 is the one selected by

the operator while n.8 is the last test saved in

the instrument.

CLR

RCL

ESC

CLR

Press CLR again if the tests selected are to be cancelled

starting from the one selected down to the last one saved.

RCL

ESC

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 121 122

Sin comentarios

Amprobe Multitest-1000 Continuity-Tester Manual de usuario Pagina 45